From ramana at member.fsf.org Wed Jun 8 07:55:44 2016 From: ramana at member.fsf.org (Ramana Kumar) Date: Wed, 8 Jun 2016 17:55:44 +1000 Subject: [opentheory-users] Retract upload In-Reply-To: References: Message-ID: Hi Joe, Thanks for looking into this. I retried today, and something weird happened again: started upload to gilith repo: http://opentheory.gilith.com/?upload=32b54e40e38f00cd331f0a6eabb68d99 encountered error, so deleted upload to gilith repo FATAL ERROR: opentheory failed: error response from repo: gilith repo: failed to upload package arm-model-1.0: WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print WARNING: term too large to print package upload failed package upload failed What should I do? Cheers, Ramana On 16 May 2016 at 15:25, Joe Leslie-Hurd wrote: > Hi Ramana, > > Yes, you are quite correct. There were two packages in the staging > area with no corresponding active uploads, which I was able to > cleanup: > > $ opentheory cleanup > cleaned up staged package arm-model-1.0 > cleaned up staged package arm-step-1.0 > > I have no idea how it happened. Please retry the upload and let me > know if something weird happens again. > > Cheers, > > Joe > > > On Fri, May 13, 2016 at 4:33 PM, Ramana Kumar > wrote: > > I have tried all the links sent by email and they all say the upload has > > been confirmed or expired. I don't think any link was sent for the > original > > failing upload which has left something in the staging area. > > > > On 14 May 2016 03:19, "Joe Leslie-Hurd" wrote: > >> > >> Hi Ramana, > >> > >> You should have received an email asking you to confirm the upload. If > >> you visit that link you can click on the other option, > >> > >> "Report to the repo maintainer that I am not the author" > >> > >> which should delete the upload. > >> > >> Cheers, > >> > >> Joe > >> > >> On Fri, May 13, 2016 at 1:45 AM, Ramana Kumar > >> wrote: > >> > Hi, > >> > > >> > I am trying to upload a package to the Gilith OpenTheory repository > >> > using > >> > the opentheory tool. The upload fails with this error: > >> > > >> > Error: package arm-model-1.0 is already staged for installation > >> > > >> > I think the only reason it is already staged for installation is due > to > >> > a > >> > failed attempt of mine previously to upload the package. Is there any > >> > way > >> > for me to cancel this attempt if I have lost the link the tool printed > >> > out > >> > initially? > >> > > >> > (My next question is going to be about why the initial failure > occurred > >> > (there was no error message as far as I recall)...) > >> > > >> > Cheers, > >> > Ramana > >> > > >> > > >> > _______________________________________________ > >> > opentheory-users mailing list > >> > opentheory-users at gilith.com > >> > http://www.gilith.com/mailman/listinfo/opentheory-users > >> > > >> > >> _______________________________________________ > >> opentheory-users mailing list > >> opentheory-users at gilith.com > >> http://www.gilith.com/mailman/listinfo/opentheory-users > > > > > > _______________________________________________ > > opentheory-users mailing list > > opentheory-users at gilith.com > > http://www.gilith.com/mailman/listinfo/opentheory-users > > > > _______________________________________________ > opentheory-users mailing list > opentheory-users at gilith.com > http://www.gilith.com/mailman/listinfo/opentheory-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From joe at leslie-hurd.com Thu Jun 9 06:51:12 2016 From: joe at leslie-hurd.com (Joe Leslie-Hurd) Date: Wed, 8 Jun 2016 23:51:12 -0700 Subject: [opentheory-users] Retract upload In-Reply-To: References: Message-ID: Hi Ramana, Thanks for trying again - I have enough information now to try to reproduce this error, so I'll try to get to the bottom of it. Cheers, Joe On Wed, Jun 8, 2016 at 12:55 AM, Ramana Kumar wrote: > Hi Joe, > > Thanks for looking into this. > > I retried today, and something weird happened again: > > started upload to gilith repo: > http://opentheory.gilith.com/?upload=32b54e40e38f00cd331f0a6eabb68d99 > encountered error, so deleted upload to gilith repo > > FATAL ERROR: opentheory failed: > error response from repo: > gilith repo: failed to upload package arm-model-1.0: > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > WARNING: term too large to print > package upload failed > package upload failed > > What should I do? > > Cheers, > Ramana > > > On 16 May 2016 at 15:25, Joe Leslie-Hurd wrote: >> >> Hi Ramana, >> >> Yes, you are quite correct. There were two packages in the staging >> area with no corresponding active uploads, which I was able to >> cleanup: >> >> $ opentheory cleanup >> cleaned up staged package arm-model-1.0 >> cleaned up staged package arm-step-1.0 >> >> I have no idea how it happened. Please retry the upload and let me >> know if something weird happens again. >> >> Cheers, >> >> Joe >> >> >> On Fri, May 13, 2016 at 4:33 PM, Ramana Kumar >> wrote: >> > I have tried all the links sent by email and they all say the upload has >> > been confirmed or expired. I don't think any link was sent for the >> > original >> > failing upload which has left something in the staging area. >> > >> > On 14 May 2016 03:19, "Joe Leslie-Hurd" wrote: >> >> >> >> Hi Ramana, >> >> >> >> You should have received an email asking you to confirm the upload. If >> >> you visit that link you can click on the other option, >> >> >> >> "Report to the repo maintainer that I am not the author" >> >> >> >> which should delete the upload. >> >> >> >> Cheers, >> >> >> >> Joe >> >> >> >> On Fri, May 13, 2016 at 1:45 AM, Ramana Kumar >> >> wrote: >> >> > Hi, >> >> > >> >> > I am trying to upload a package to the Gilith OpenTheory repository >> >> > using >> >> > the opentheory tool. The upload fails with this error: >> >> > >> >> > Error: package arm-model-1.0 is already staged for installation >> >> > >> >> > I think the only reason it is already staged for installation is due >> >> > to >> >> > a >> >> > failed attempt of mine previously to upload the package. Is there any >> >> > way >> >> > for me to cancel this attempt if I have lost the link the tool >> >> > printed >> >> > out >> >> > initially? >> >> > >> >> > (My next question is going to be about why the initial failure >> >> > occurred >> >> > (there was no error message as far as I recall)...) >> >> > >> >> > Cheers, >> >> > Ramana >> >> > >> >> > >> >> > _______________________________________________ >> >> > opentheory-users mailing list >> >> > opentheory-users at gilith.com >> >> > http://www.gilith.com/mailman/listinfo/opentheory-users >> >> > >> >> >> >> _______________________________________________ >> >> opentheory-users mailing list >> >> opentheory-users at gilith.com >> >> http://www.gilith.com/mailman/listinfo/opentheory-users >> > >> > >> > _______________________________________________ >> > opentheory-users mailing list >> > opentheory-users at gilith.com >> > http://www.gilith.com/mailman/listinfo/opentheory-users >> > >> >> _______________________________________________ >> opentheory-users mailing list >> opentheory-users at gilith.com >> http://www.gilith.com/mailman/listinfo/opentheory-users > > > > _______________________________________________ > opentheory-users mailing list > opentheory-users at gilith.com > http://www.gilith.com/mailman/listinfo/opentheory-users >